PlusOne Provides Everything You Need To Make Your Bike Electric
The motor goes in the front where it can pull you up those pesky hills and the battery pack and controller are all integrated into the battery cage. The battery pack and cage are designed to look and fit like a typical water bottle. PlusOne needs just one wire to connect the hub motor to the battery. An optional wired throttle is included for free for flexibility. In as little as 5 minutes you can install PlusOne on your bike and enjoy the freedom and convenience of riding on pure electric power.
How PlusOne Works
PlusOne uses a proprietary technology called SmartAssist™. SmartAssist calculates the power you need automatically while you ride. It monitors your speed, the grade of the road and the assist level you select to determine the optimal amount of power to provide.
On a flat road? SmartAssist gives you the assistance you need.
Going up a hill? SmartAssist increases the assistance to cut your hills down to size.
Coasting down a hill? Smartassist knows not to assist.
And don't worry, power is stopped automatically when you brake. SmartAssist really is that smart!
Bluetooth allows PlusOne to communicate wirelessly with an app on your iOS or Android smartphone. And the app is just a free download away. The app does so many things -
• setup PlusOne and configure different options
• controls for you to set your assist level while riding
• a real-time dashboard with speedometer, power meter, battery and temperature gauge
• a tracker for current and total ride data
• even a virtual lock which sounds an alarm while magnetically locking the front wheel!
The App does so many things, you might not want to ride without it - but you could. PlusOne remembers your settings - including your assist level - so you don't need to carry your phone with you to enjoy PlusOne.
We know everyone is different, and some of you may want some control over SmartAssist. Don't worry - we've got you covered. PlusOne comes with a wired throttle and can use SmartAssist, Pedal Assist or a Throttle/Display unit for manual control.
And both are 100% wireless for ease of installation.
Our optional Bluetooth Throttle/Display allows you to add extra power when you need it, while providing many of the display functions that a phone app provides.
Bluetooth Pedal Assist Sensor
The optional Bluetooth Pedal Assist Sensor allows you to control when SmartAssist operates. SmartAsssit works normally while you are pedaling, and turns off when you stop.
Will PlusOne Fit Your Bike?
It's pretty easy to tell with just a ruler... PlusOne needs roughly 100mm or 4 inches of room between the ends of your bike's front forks and a minimum of 10mm or 3/8" slot width in the forks.
Please note: PlusOne does not work with thru-axles currently.
PlusOne also needs a place to mount the battery cage. Most bikes have 2 screws on the downtube for a water bottle cage which can be used. Other mounting positions are possible, but please contact us before commiting.